
Replacing a SATA Backplane Assembly
5-34 Express5800/320Ma: Operation and Maintenance Guide
Figure 5-21. Removing the SATA Backplane Assembly
7. Slide the new SATA backplane assembly into the enclosure. Push firmly to engage
the backplane connector.
8. Insert and fasten the two screws (number 1 in Figure 5-21) on the front of the SATA
backplane assembly.
9. Replace the SATA disk drives to their designated slots.
10. Replace the enclosure cover.
11. Replace the CPU-I/O enclosure.
1 Screws
2 SATA backplane assembly
Kommentare zu diesen Handbüchern