NEC Express5800/GT110b Betriebsanweisung PDF herunterladen (Seite 338)

100

101

9-48 Upgrading Your Server

Installation

Install a DIMM in the following procedure.

1. See the section "Preparing for Installation and Removal" described earlier to prepare.

2. Remove the side cover as described earlier in this chapter.

3. Firmly hold the server with your both hands so that its left side faces upward, and bring it

down slowly and gently.

4. Open the levers at both ends of the socket (c).

5. Push the DIMM to the socket straight (d).

If the DIMM is inserted into the DIMM socket, the lever is automatically closed.

IMPORTANT: To avoid damaging the lever, do not apply an excess

force to the lever.

NOTE: Use extreme care when installing a DIMM. Applying too

much pressure can damage the socket. Keyed DIMMs insert only one

way.

6. Close the lever securely.

7. Install the remove components.

8. Turn on the power of the server. Make sure that no error message appears in the POST.

If an error message appears, write down the message and contact your service

representative for the maintenance.

9. Run BIOS SETUP utility and check to see that the installed DIMMs are correctly

recognized. See Chapter 4 for details.

10. Run BIOS SETUP Utility to set the "Reset Configuration Data" in the "Advanced" menu

to "Yes." This is required to update the hardware configuration information. See Chapter 4

for details.

11. Set the paging file size to the recommended value or larger. See Chapter 5 for details.

Key slot

Key

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 493 494

Kommentare zu diesen Handbüchern

Keine Kommentare

NEC Express5800/GT110b Betriebsanweisung Seite 338

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server NEC Express5800/GT110b