NEC Express5800/GT110b Betriebsanweisung PDF herunterladen (Seite 407)

100

101

Installing Windows Server 2008 E-7

Create from the menu which appears when running NEC Express5800 Server with

NEC EXPRESSBUILDER

If you have only NEC Express5800 server to create Windows Server 2008 OEM-Disk for

EXPRESSBUILDER, use this procedure.

If Windows Server 2008 can be operated on NEC Express5800 Server, you can use the other

procedure described later.

Follow the steps below.

1. Prepare one Flash FDD or 3.5-inch floppy disk.

2. Turn on your NEC Express5800 server.

3. Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.

4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may also

turn off and then on again to reboot the server.)

The system will boot from the DVD and NEC EXPRESSBUILDER starts.

5. Select [Create the OEM-Disk for Windows] from [Tools Menu] step.

6. Connect the Flash FDD or insert a floppy disk into the floppy disk drive.

7. Select [Create a Windows Server 2008 OEM-Disk for EXPRESSBUILDER] at [Create

OEM-Disk] and click [Perform].

NOTE: In case of creating the disk for Windows Server 2008 64-bit

(x64) Edition, select [Create a Windows Server 2008 x64 OEM-Disk

for EXPRESSBUILDER].

8. Windows Server 2008 OEM-Disk for EXPRESSBUILDER will be created.

Write-protect and attach a label, then keep it safely.

NOTE: If the following message is displayed, the floppy disk is

write-protected.

Cancel write-protected state.

If you have already cancelled write-protected state, connect the floppy

disk drive again.

1 2 ... 402 403 404 405 406 407 408 409 410 411 412 ... 493 494

Kommentare zu diesen Handbüchern

Keine Kommentare

NEC Express5800/GT110b Betriebsanweisung Seite 407

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server NEC Express5800/GT110b