
86
raidcmd
Use "stspd" command.
Step 1 Execute "stspd" command with -st option
and the following parameters.
-c : Number of the RAID Controller containing the Physical
Device with its status set to [Online] forcibly
-p : Number of the Physical Device with its status set to
[Online] forcibly
-st : Specify "online"
Step 2 Displays the Warning message and the
confirmation message. Type "yes" to reply to the
confirmation message. Then [Status] of the Physical
Device is changed to [Online]. Type "No" to abort the
change status of the Physical Drive.
Step 3 If "stspd" command succeeds, the
[Status] of the Physical Device is set to [Online].
To [Failed] Forcibly
To set the [Status] of a Physical Device to [Failed] forcibly, use Make Offline. The procedure of executing Make
Offline is described below.
The redundancy of Logical Drive will be lost if you forcibly change the status of the Physical
Device used for the Logical Drive.
RAID Viewer
Use [Make Offline] in [Control] menu.
Step 1
Start the RAID Viewer. Click a Physical Device with [Status] being
[Online] on the Tree View. Then click [Make Offline] on the pull-down menu of
menu item [Control].
Step 2 Displays the Warning message and the confirmation
message. Click [Yes], then [Status] of the Physical Device is
changed to [Failed].
Then click [No], without changing the status of the Physical
Device.
Step 3 After the Make Offline succeeds, [Status] of the Physical Device is changed to [Failed].
> raidcmd stspd -c=1 -p=4 -st=online
Make the Physical Device online.
[Warning] The consistency of Logical Drive will be lost.
Do you continue ? [yes(y) or no(n)] : yes
Change the status of Physical Device #3 to "Online"
>
> raidcmd property -tg=pd -c=1 -p=3
RAID Controller #1 Physical Device #3
ID : 2
Enclosure : 1
Slot : 3
Device Type : HDD
Interface : SAS
Vendor/Model : SEAGATE ST936751SS
Firmware Version : 0001
Serial Number : 3PE073VM
Capacity : 33GB
Status : Online
S.M.A.R.T. : Normal
>
Kommentare zu diesen Handbüchern