
CONFIGURATION GUIDE – NEC Express5800/A2040b, A2020b, A2010b, A1040b
NEC Corporation Revision 8.0 – April 2015
With PCI Card Customized Configuration Service (NE3300-SV401)
Starting from the PCI cards with higher priority (see the table below), PCI cards are installed to the PCI slots
with higher priority among the available slots per CPU configuration (see the table below). The following basic
rules are applied to BTO configuration. If any other specific installation requirements, BTO configuration will
not be applied.
Please order this customized service when no HDD is included in the ordered configuration for FC SAN boot.
Please order this customized service when connecting Flash Back-up Unit to External RAID Controller.
[Basic Rules for PCI Card Installation]
When the number of available PCI slot is 13, PCI cards requiring IO space should be 10 at maximum.
When the number of available PCI slot is 16, PCI cards requiring IO space should be 13 at maximum.
The 1
st
RAID Controller needs to be installed to Slot#1. The 2
nd
RAID Controller (if any) will not be
installed (out of BTO configuration)
1000BASE-T Adapter, 1 port and 2 port, needs to be installed to Slot#9 (or, in case of 1CPU
configuration, Slot#5)
External RAID Controller should be installed to Slot#5, #8, #12 or #16.
Priority of PCI Cards:
Can install to Slot #1 only
1000BASE-T Adapter (2 port)
1
st
card can install to Slot #9 only (or in
case of 1CPU configuration, #5)
1000BASE-T Adapter (1 port)
NE3303-H001
(+ NE3303-H002)
External RAID Controller (1GB)
(+ FBU)
Can install to Slot #5,#8,#12 and #16
only
Fibre Channel Controller (16G/ 2port)
Can install to any slot other than
Slot #8 and #9
Fibre Channel Controller (16G/1 port)
Fibre Channel Controller (8G/2 port)
Fibre Channel Controller (8G/1 port)
External RAID Controller (1GB, w/o
FBU)
10GBASE Adapter (SFP+/2ch)
Can install to any slot other than
Slot #8 and #9
1000BASE-T Adapter (4 port)
NE3304-132 (2
nd
and more)
1000BASE-T Adapter (2 port)
NE3304-138 (2
nd
and more)
1000BASE-T Adapter (1 port)
Kommentare zu diesen Handbüchern