NEC Express5800/120Bb-6 Betriebsanweisung PDF herunterladen (Seite 107)

Chapter 5 Creating Virtual Disk

This section describes the WebBIOS configuration utility.

1. Before Using WebBIOS

Before configuring RAID, the system BIOS of your server system must be set up.

If you have executed [Load Setup Defaults] in BIOS SETUP, you must change the parameters as described

below.

To setup the system BIOS, press F2 when the screen as shown below appears after powering on the server

(while POST is running).

Press<F2> to enter Setup or Press <F12> to network

 Enable Option ROM Scan

Select [Advanced] [PCI Configuration] [Mezzanine Type 2 Option ROM] and change the

parameter value from [Disabled] to [Enabled].

 Disable the parameters for the onboard SCSI controller.

Select [Advanced] [Embedded SCSI] and change each parameter as follows:

SCSI Controller: [Enabled] [Disabled]

Option ROM Scan: [Enabled] [Disabled]

RAID Enable: [Enabled] [Disabled]

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 145 146

Keine Kommentare

NEC Express5800/120Bb-6 Betriebsanweisung Seite 107