NEC NP-PH1400U Bedienungsanleitung PDF herunterladen (Seite 183)

169

6. Installation and Connections

6. Place the lens shroud back onto the lens hood.

• Tightenthetwoscrewstoxthelensshroud

NOTE :

Besuretoperform[CALIBRATION]afterinstallationorreplacementof

the lens. (→ page 19, 130)

Removing the lens

Before removing the lens:

1. Turnontheprojector.(→ page 18)

2. PressandholdtheSHUTTER/HOMEPOSITIONbuttonforaminimumof2seconds.

The lens position will return to the home position. (→ page 27)

3. Turnoffthemainpowerandunplugthepowercord.

4. Waitfortheprojectortocoolsufcientlybeforeremovingthelens.

1. Remove the lens shroud.

(→ page 167)

2. Slowly turn the lens release lever clockwise until it points

upward.

3. Setthesafetylevertotheleftposition(UNLOCK).

LOCK

LENS

4. Slowlyremovethelensfromtheprojectorbypullingit

straight out.

• Afterremovingthelens,attachthelenscaptoboththe

frontandbackofthelensforproperstorage.

5. Place the lens shroud back into the lens hood.

• Tightenthetwoscrewstoxthelensshroud.

• Iftheprojectorisstoredwithoutthelens,attachthedust

cover to the lens hood.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 254 255

Keine Kommentare

NEC NP-PH1400U Bedienungsanleitung Seite 183