NEC NP-PH1400U Bedienungsanleitung PDF herunterladen (Seite 147)

133

5. Using On-Screen Menu

[OPTIONS(1)]

Setting Auto Adjust [AUTO ADJUST]

ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfor

noiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].

OFF �� The computer signal will not be automatically adjusted� You can manually optimize the computer signal�

NORMAL �� Default setting� The computer signal will be automatically adjusted� Normally select this option�

FINE �� Select this option if ﬁne adjustment is needed� It takes more time to switch to the source than when [NOR-

MAL]is selected�

Selecting Fan Mode [FAN MODE]

FanModeisusedtosetthespeedoftheinternalcoolingfan.

MODE �� Select three modes for fan speed: AUTO, HIGH, and HIGH ALTITUDE�

AUTO: The built-in fans automatically run at a variable speed according to the internal temperature�

HIGH: The built-in fans run at high speed

HIGH ALTITUDE: The built-in fans run at a high speed� Select this option when using the projector at altitudes

approximately 5500 feet/1600 meters or higher�

SETTING �� Select one of the two options ([FLOOR], [CEILING]) according to the orientation of the projector�

NOTE:

• [VERTICALTILTUP]and[VERTICALTILTDOWN]arenotavailableonthisprojector.Evenifyouselect

[VERTICALTILTUP]or[VERTICALTILTDOWN]from[FANMODE],thesettingwillbedisabled.

• Besuretoselectthe[SETTING]optionaccordingtotheprojector’sorientation.Failuretodosomaycause

product malfunction. If installing the projector on the ceiling while keeping it in a desktop orientation,

select[FLOOR]for[SETTING].

Whenyouwishtocooldownthetemperatureinsidetheprojectorquickly,select[HIGH].

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 254 255

Keine Kommentare

NEC NP-PH1400U Bedienungsanleitung Seite 147