NEC Express5800/R110f-1E Bedienungsanleitung PDF herunterladen (Seite 103)

raidcmd

103

Step 1

Execute "optctrl" command with -psd

option and the defined parameters.

-c : Number of RAID Controller for which Power Saving

Device is set.

-psd : Select none or hotspare to change the Power

Saving Device.

Ex) Changes value of HDD Power Saving (Hot Spare)

to "enable" (RAID Controller Number is 1)

raidcmd optctrl -c=1 -psd=hotspare

Step 2 Checking the execution result by using

"property" command. The following parameter of RAID

Controller is changed.

[Power Saving (Hot Spare)] : "Enable" to selected "hotspare". "Disable" to selected "none".

Ex) Referring to property of the RAID Controller (RAID Controller number is 1)

raidcmd property -tg=rc -c=1

Patrol Read : Enable

Patrol Read Priority : High

Buzzer Setting : Disable

HDD Power Saving(Hot Spare) : Enable

Device Standby Time : 30 minutes

Rebu

ild Priority : Middle

Consistency Check Priority : Middle

Premium Feature : CacheCade

Battery Status : Normal

> raidcmd optctrl -c=1 -psd=hotspare

> raidcmd property -tg=rc -c=1

RAID Controller #1

ID : 0

Vendor : LSI Corporation

Model : LSI MegaRAID SAS 9267-8i

Firmware Version : 3.140.05-1294

Cache Size : 1,024MB

Only a single parameter can be set at a time. If execute "optctrl" command with -psd option

and -dst option at the same time, command is failed.

Setting Device Standby Time

Set the time of transitioning to Power Saving the Physical Device which is not in use.

You can select the time of transitioning from 30 minutes, 1 hour, 2 hours, 4 hours, and 8 hours.

 Some types of RAID Controller do not support this function. If it does not support this

function, the items do not appear. "optctrl" command of raidcmd is failed.

 If HDD Power Saving is "disable", items [Device Standby Time] on the [Options] tab do not

appear. "optctrl" command of raidcmd is failed.

 If you set any value (other than 30 minutes, 1 hour, 2 hours, 4 hours, or 8 hours that can

be selected on Universal RAID Utility) by the BIOS utility, the value appears in a selectable

list on Universal RAID Utility as a current value.

RAID Viewer

Step 1

Start the RAID Viewer. Click the RAID Controller on the Tree View. Then click [Properties] on the [File] menu.

Step 2 Click the [Option] tab in the [RAID

Controller #X Properties] dialog box. Change the

value of [Device Standby Time]. Click [OK] or [Apply].

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 134 135

Kommentare zu diesen Handbüchern

Keine Kommentare

NEC Express5800/R110f-1E Bedienungsanleitung Seite 103

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für RAID-Kontroller NEC Express5800/R110f-1E