NEC MDview 213 Betriebsanweisung PDF herunterladen (Seite 30)

English-28

Input Setting Video Bandwidth (Analog input only): It is used when the unnecessary noise from

computer appears on a screen. It is strong ineffective, so that a number becomes small.

Press “Left” or “Right” to select.

Sync Threshold (Analog input only): Adjusts the slice level of a synchronization signal.

Press “SELECT” to move the adjustment menu. Adjusts the sensitivity of the separate or

composite input signals.

Try this option if the FINE adjustment does not successfully eliminate the noise.

SOG Threshold (Analog input only): Adjusts the sensitivity of the Sync On Green input

signals. Adjusts the slice level when separating synchronization from sync On Green

signal input. Press “Left” or “Right” to select.

Edge Lock: Operating your monitor at a non-standard timing may cause images to

appear darker than normal or have colour distortion. Use of the Edge Lock control will

adjust images to their normal state.

TagA Tile Matrix Tile Matrix demonstrates multiple screens. This feature provides a single large screen

using up to 25 monitors. It will be able to divide up to 5 each H and V.

This requires you to feed the PC output into each of the monitors through a distributor.

ENABLE: Select “ON”, the monitor will expand the selected position.

H MONITOR: Select number of horizontal divide.

V MONITOR: Select number of vertical divide.

MONITOR No: Select a position to expand the screen.

TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile

bezels in order to accurately display the image.

Tile Comp with 4 monitors (black area shows monitor frames):

TagB Date & Time Adjusts the current date and time for internal clock. You should set this function when you

use “SCHEDULE”.

Daylight Saving: For those timezones where Daylight Saving Time (Summertime)

is observed.

monitor1

monitor2

monitor3

monitor4

monitor1

monitor2

monitor3

monitor4

Tile Comp ONTile Comp OFF

1 2 ... 25 26 27 28 29 30 31 32 33

Keine Kommentare

NEC MDview 213 Betriebsanweisung Seite 30