NEC E463 Bedienungsanleitung PDF herunterladen (Seite 19)

English-17English-16

English

RS-232C Port Specifications

PC control of the Display

Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub

RS-232C for the connections�

Note: This operation system should be used by a person who is accustomed to using

computers�

Communication conditions

Set the RS-232C communication settings on the PC to match the display's

communication conditions�

The display's communication settings are as follows:

Baud rate: 9,600 bps

Data length: 8 bits

Parity bit: None

Stop bit: 1 bit

Communication procedure

Send the control commands from the PC via the RS- 232C connector�

The display operates according to the received command and sends a response

message to the PC�

Do not send multiple commands at the same time� Wait until the PC receives the

response before sending the next command�

Power Mode Status

Mode LED Status

On None

Standby Red

Warming

Blinking Red

Power saving support automatically power on when signal appear�

Standby to power on by touch up remote or keypad power button�

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Keine Kommentare

NEC E463 Bedienungsanleitung Seite 19