Nec MultiSync V462 Bedienungsanleitung PDF herunterladen (Seite 26)

English-24

INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be displayed

when the input signal or source changes. The information OSD will also give a warning when

there is no-signal or the signal is out-of range.

An interval between 3 to 10 seconds for the Information OSD to appear is available.

ON, 3 Sec.

MONITOR INFORMATION

Indicates the model and serial number of your monitor.

CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon footprint

factor in the carbon saving calculation is based on the OECD (2008 Edition).

OSD TRANSPARENCY Set the transparency of the OSD. ON

OSD ROTATION Determines the OSD display direction between landscape and portrait.

V651 display direction is landscape only.

LANDSCAPE

LANDSCAPE Display the OSD with landscape mode.

PORTRAIT Display the OSD with portrait mode.

INPUT NAME You can create a name for the INPUT currently being used.

Max: 8 characters, including Space, A-Z, 0-9, and some symbols.

CLOSED CAPTION

VIDEO1, VIDEO2, S-VIDEO inputs only

Activates closed captioning. OFF

RESET Resets the following settings within the OSD menu back to factory setting:

MENU DISPLAY TIME, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,

CLOSED CAPTION.

MULTI DISPLAY

CONTROL ID Sets the monitor ID number from 1-100 and group ID from A-J.

NOTE: Group ID is made of multiple selections.

IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the

RS-232C daisy chain.

NORMAL

NORMAL The monitor will be controlled normally using the remote controller.

PRIMARY Choose “PRIMARY” for the ﬁ rst monitor within an RS-232C daisy chain.

SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.

LOCK Prevents the monitor from being controlled by the wireless remote controller. To return to normal

operation, press the “DISPLAY” button on the remote controller for 5 seconds.

TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 100) through a

distribution ampliﬁ er.

NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate

without a distribution ampliﬁ er at a lower number of screens.

The ZOOM setting of ASPECT becomes invalid.

H MONITORS Number of monitors arranged horizontally.

V MONITORS Number of monitors arranged vertically.

POSITION Select which section of the tiled image to be displayed on the monitor.

TILE COMP Turns the TILE COMP feature on.

ENABLE Enables Tile Matrix.

POWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode.

“POWER ON DELAY” can be set between 0 and 50 seconds.

0 Sec.

POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor.

If “OFF” is selected, LED will not light when the LCD monitor is in active mode.

EXTERNAL CONTROL

CONTROL Selects the control interface, RS-232C or LAN. RS-232C

LAN RESET Resets the LAN settings. -

ID=ALL REPLY When controlling the monitor externally, select if the communication command, which speciﬁ es

destination equipment ID (ALL or GROUP ID), is replying or not. When you need reply, please

select “ON”.

If you connect the multiple monitors that are daisy-chained from second monitor by RS-232C,

you need to select “OFF” from second monitor.

OFF

MAC ADDRESS Displays the MAC ADDRESS. -

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

Nec MultiSync V462 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher Nec MultiSync V462