
CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d
NEC Corporation Revision 2.1, January 2012 10
4.1.2 2.5-inch Drive
NOTE:
On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
Mixing SAS and SATA hard drives in the same system is not supported.
Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.
An optional RAID controller occupies one PCI slot.
4.2 Internal Drive Configuration
4.2.1 3.5-inch Drive with On-board SATA Controller
Product Name / Description
On-board SATA Controller
4 x SATA ports, RAID 0/1/10 capable
Internal SATA Cable
1x SATA to 1x SATA, 4 sets
3.5-inch HDD cage
4 x 3.5-inch non hot plug (fixed) hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
NOTE:
On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.
3 TB HDDs are not supported with the on-board SATA non-RAID controller.
All hard drives within a RAID array should be of the same capacity.
Kommentare zu diesen Handbüchern