NEC Express5800/R120d-2E SR Betriebsanweisung PDF herunterladen (Seite 21)

BMC Configuration User's Guide

Item Description Default Value

Subnet Mask Set the Subnet Mask of the managed server. *3 *4 255.255.255.0

Default Gateway

Set the Default Gateway IP address of the managed server. *4

If you set this item, it is necessary for applying configuration

information that the gateway is connected on network.

0.0.0.0

Dynamic DNS Determine whether to enable/disable of Dynamic DNS. *5 Disable

DNS Server Set the DNS Server. 0.0.0.0

Host Name Set the Host Name. *6 *7 Blank

Domain Name Set the Domain Name. *7 Blank

Access Limitation Access Limitation setting

Access

Limitation Type

Select the Access Limitation Type.

Allow All

: Access to BMC is not limited.

Allow Address

: Set the IP Address that is allowed to access BMC.

Deny Address

: Set the IP Address that is limited to access BMC.

Allow All

IP Address Set the IP Address to allow or deny to access with BMC. *8 *9 Blank

*1: It is possible to set when the system supports change.

*2: If you modify this setting, "Reset BMC" is necessary on some systems. When set to "Shared BMC LAN",

the management LAN port is disabled. When set to "Shared BMC LAN", the network performance may be

reduced because the data of both LANs must be transmitted or received.

*3: When the Subnet Mask is wrong setting, error message, such as "Failed to apply configuration.", is

displayed.

*4: It is possible to set when DHCP is "Disable".

*5: It is possible to set when DHCP is "Enable".

*6: The length of Host Name must be less than 64 characters. Host Name will be truncated to 63 characters,

if you input over 63 characters.

*7: Host Name and Domain Name should be within total of 255 characters.

*8: The range of IP address to "Allow" or "Deny" access is delimited by ",(Comma)". With regard to the

setting of “Deny” access, "*(Asterisk)" can be described as a wild-card. (ex:

192.168.1.*,192.168.2.1,192.168.2.254)

*9: It is possible to set when Access Limitation Type is "Allowed Address" or "Denied Address". The length

must be less than 255 characters.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Keine Kommentare

NEC Express5800/R120d-2E SR Betriebsanweisung Seite 21