NEC M362X Bedienungsanleitung PDF herunterladen (Seite 145)

134

7. Maintenance

This completes the lamp replacement.

Go on to the clearing lamp hour meters.

NOTE:Whenyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife,theprojector

cannotturnonandthemenuisnotdisplayed.

Ifthishappens,presstheHELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.

Whenthelamptimeclockisresettozero,theLAMPindicatorgoesout.



To clear the lamp usage hours:

1. Placetheprojectorwhereyouuseit.

2. Plugthepowercordintothewalloutlet,andthenturnontheprojector.

3. Clearthelampusagehours.

From the menu, select [RESET] → [CLEAR LAMP HOURS] and reset the lamp usage hours.

4. Reattachthelampcover.

(1)Slidethelampcoverbackuntilitsnapsintoplace.

(2)Tightenthescrewtosecurethelampcover.

 •Besuretotightenthescrew.

3. Installanewlamphousing.

(1)Insertanewlamphousinguntilthelamphousingispluggedintothesocket.

(2)Pushthetopcenterofthelamphousingtosecureit.

(3)Secureitinplacewiththethreescrews.

 •Besuretotightenthescrews.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 164 165

Keine Kommentare

NEC M362X Bedienungsanleitung Seite 145