Nec GT2150 Bedienungsanleitung PDF herunterladen (Seite 27)

E – 17

6) Link Mode Setting

6-1 Assign a unique Projector ID for each projector.

6-1-1. Select [Projector Options] → [Setup] →[Page 5] → [Projector ID].

See page E-50 for specifying ID.

6-1-2. Specify a unique projector ID for each projector.

6-2 Select the same communication speed for all the projectors.

6-2-1. Select [Projector Options] → [Setup] →[Page 5] → [Communica-

tion Speed]. See page E-50 for setting the communication speed.

6-2-2. Select the appropriate speed between 4800 and 38400.

6-3 Set the Link Mode on each projector.

6-3-1. Select [Projector Options] → [Link Mode].

6-3-2. First select [Slave] on the slave projector.

6-3-3. Select [Master] on the master projector. See page E-50 for setting

Link Mode.

6-4 Project a source image from all projectors

6-4-1. Display any signal onto the screen.

6-4-2. Check to see if the imags on the master projector are displayed in

syncronization with the ones on the other slave projector while the pro-

jectors are in link mode.

NOTE: Registering signals is not possible in the Link mode. To register a

signal, first set "Link Mode" to "Standalone" on the menu and then repeat

the above steps from 3. If you select an unregistered signal, the master

projector displays the image, but the slave projector doesn't. To view the

information on the currently displayed signal, select [Help]

→

[Source In-

formation]

→

[Page1].

6-5 Make adjustments to the slave projector.

NOTE: See “List of Menu Items Available on Link Mode” on page E-62 for

more information.

6-5-1. Temporarily, change the master projector from Master to Standalone.

Make sure that the slave projector is still in Slave mode.

6-5-2. Display a source you want to adjust from the master projector.

6-5-3. On the Slave Projector select the same signal From the Entry List

(same No.) as that of the master projector. Display it from the slave

projector.

6-5-4. Make Picture adjustment such as brightness, contrast, or color tem-

perature.

6-5-5. Change the master projector from Standalone to Master to activate

the Link Mode

6-6 This completes the Link Mode adjustment procedure.

NOTE: The optional lenses for GT2150 have different geometrical distortions in

wide zoom and tele. Select the best zoom position for stacking where the geo-

metrical distortion is as small as possible. See page E-63 for the recommended

throw distances and other notes.

Projector Orientation

An image can be projected from in front or behind a screen, and the

projector can be installed on the ceiling*.

Ceiling Front Projection

Use [Projector Options] → [Setup] → [Page 1] → [Orientation] to se-

lect "Ceiling Front". (See page E-49.)

NEC

Ceiling Rear Projection

Use [Projector Options] → [Setup] → [Page 1] → [Orientation] to se-

lect "Ceiling Rear". (See page E-49.)

NEC

Transparent screen

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Nec GT2150 Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Nec GT2150